Behavior Models Cookbook
-
Vendor Models - WfPwrSupplyCheck -
Path: /model/vendors/wellfleet/wf_pwr_supply_check.mod
This behavior model monitors the power supplies status in a Wellfleet (Nortel) router. If a poll shows a problem with any of the power supplies, the alarm transitions to the PowerSupplyWarning state which then polls the power supply status again for verification. If there is a problem, NerveCenter sends a 6507 Inform to the platform. Once the problem has been corrected, the alarm returns to ground.
Two additional alarms, WfPwrSupplyCheck_LogToDB and WfPwrSupplyCheck_LogToFile, are part of this model. When you enable these alarms, they perform a Log To Database or a Log to File alarm action, respectively, on each transition so that reports on power supply status can be produced.
The following property must be in the property group for the nodes you want to monitor:
Below is a list of the objects that generate triggers:
Events Sent to OpenView by WfPwrSupplyCheck summarizes the events this behavior model sends to OpenView:
Events Sent to OpenView by WfPwrSupplyCheck
| Event Name | Inform Number | Description |
|---|---|---|
For complete information about events sent to OpenView, see the trapd.conf.txt file shipped with these behavior models residing in:
/model/vendors/wellfleet
For more information about integrating NerveCenter with OpenView, or the other NerveCenter-supported network manager platforms, refer to the book Integrating NerveCenter with a Network Management Platform.
Below is a list of behavior model settings that you might want to customize to suit the requirements of your site.
| WfMemCheck | WfTempCheck |
| 29 July 2003 |