Behavior Models Cookbook
-
Vendor Models - CiscoBufferUtilization -
Path: /model/vendors/cisco/cisco_buffer_utilization.mod
Monitors the free element buffers on Cicso routers to determine if their buffer availability is at acceptable levels. If buffer availability is less than five percent for three poll intervals, then NerveCenter sends a 6005 Inform to the platform.
Two additional alarms, CiscoBufferUtilization_LogToDB and CiscoBufferUtilization_LogToFile, are part of this model. When you enable these alarms, they perform a Log To Database or a Log to File alarm action, respectively, on each transition so that reports on buffer utilization can be produced.
The following property must be in the property group for the nodes you want to monitor:
Below is a list of the objects that generate triggers:
Events Sent to OpenView by CiscoBufferutilization summarizes the events this behavior model sends to OpenView:
Events Sent to OpenView by CiscoBufferutilization
| Event Name | Inform Number | Description |
|---|---|---|
The buffer utilization for this device has been high over a persistent period of time. | ||
For complete information about events sent to OpenView, see the trapd.conf.txt file shipped with these behavior models residing in:
/model/vendors/cisco
For more information about integrating NerveCenter with OpenView, or the other NerveCenter-supported network manager platforms, refer to the book Integrating NerveCenter with a Network Management Platform.
Below is a list of behavior model settings that you might want to customize to suit the requirements of your site.
| Vendor Models | CiscoCPUUtilization |
| 29 July 2003 |