Managing NerveCenter - Managing NerveCenter Port Settings - Changing the Command Line Interface Port -
Configuring NerveCenter to Receive Inform Actions      Specifying SNMP Ports for NerveCenter

Changing the Command Line Interface Port

You can use NerveCenter's command line interface to delete, list, or set (enable or disable) alarms, trap masks, nodes, and polls from a Windows Command Prompt or a UNIX shell. You can also connect to, display the status of, and disconnect from NerveCenter servers using the CLI. You can issue commands manually or from a script.

 
  To specify the port NerveCenter uses for the command line interface:

  1. Open NerveCenter Administrator and connect to an appropriate NerveCenter Server. See Connecting Administrator to a NerveCenter Server on page 38.
  2. Select the Ports tab.

    The Ports tab is displayed.

    portsWin5

  3. In the Command Line Interface field, enter the number of the port through which this NerveCenter Server should receive commands from its Command Line Interface.
  4. Select Save.

The current NerveCenter Server will receive commands from the port specified.


Configuring NerveCenter to Receive Inform Actions Specifying SNMP Ports for NerveCenter
29 July 2003