Managing NerveCenter - Managing NerveCenter Port Settings - NerveCenter's Client/Server Communication Port - Configuring the NerveCenter Server Connection Port -
Previous: NerveCenter's Client/Server Communication Port     Next: Changing the NerveCenter Administrator's Server Port

Configuring the NerveCenter Server Connection Port

The NerveCenter Server communicates with other applications, such as NerveCenter Client and NerveCenter Administrator, on a special connection port.

By default, this port number is 32504.

 
  To change the NerveCenter Server connection port:

1. Open NerveCenter Administrator and connect to the appropriate Server.

   See Connecting Administrator to a NerveCenter Server.

2. Select the Ports tab.

   The Ports page is displayed.

   The Server Page in NerveCenter Administrator

   

3. In the Client Connection field, enter the port number you want the NerveCenter Server to use for client/server communication.

   ---

   Caution    Remember the port number. If you change it here, you must make corresponding changes to the NerveCenter Client and NerveCenter Administrator.

   ---

4. Select Save.
5. Stop and start the NerveCenter Server.

   Changes to the communication port will not be complete until the NerveCenter Server is restarted. See Running the NerveCenter Server.

NerveCenter uses the specified port when connecting with any NerveCenter Administrator or Client.