Integrating NerveCenter with a Network Management Platform - Integrating NerveCenter with HP OpenView IT/Operations - Specifying the Destination of NerveCenter Inform Packets sent to HP OpenView IT/Operations -
Previous: Identifying Parent-Child Relationships     Next: Configuring HP OpenView IT/Operations to Divert Messages to NerveCenter

Specifying the Destination of NerveCenter Inform Packets sent to HP OpenView IT/Operations

To have NerveCenter communicate with HP OpenView IT/ Operations, you must specify the host and port where the communication will take place.

---

Note    This setting may have already been configured at the time of NerveCenter installation.

---

 
  To configure NerveCenter to communicate with HP OpenView IT/Operations:

1. Open NerveCenter Administrator and connect to the appropriate NerveCenter Server. If you need help opening NerveCenter Administrator or connecting to a NerveCenter Server, see Managing NerveCenter
2. Select the tab OpC Host.

   The OpC Host page appears.

   The OpC Host page in NerveCenter Administrator

   

3. In the Machine Name field, type the name of the machine running HP OpenView IT/Operations.
4. In the Port field, type the number of the port NerveCenter uses to communicate with HP OpenView IT/Operations.

   By default, NerveCenter uses 6028.

5. Select Save.

NerveCenter will communicate with HP OpenView IT/Operations running on this machine at this port.